Ana sayfa Ürünler Termal İletken Pad

5.0W High Quality Factory Wholesale Customized Thermal Pad Thermal Gap Filler Insulation Sheet Silicone Pad For LED CPU GPU MOS

Tüm ürünler

Faz Değiştirme Malzemeleri (38)

Termal İletken Pad (162)

Termal Boşluk Dolgu (200)

Termal İletkenlik Gresi (24)

Isı Yalıtım Malzemeleri (45)

Termal Grafit Levha (54)

Termal Yapıştırıcı Bant (44)

Termal İletken Yapıştırıcı (12)

Termal İletken Yapıştırıcı (10)

Termal İletken Plastik (20)

Sünger Köpük Malzemesi (10)

PET Çift Taraflı Bant (8)

Termal Boşluk Pedi (403)

Sıcaklık İletici Jeli (23)

Silikon Köpük Conta (11)

Silikon Ücretsiz Boşluk Dolgu Pedi (14)

Koruyucu Emici Malzemeler (19)

Isı İletişimliliği Keskin Metal (2)

Çin Dongguan Ziitek Electronic Materials & Technology Ltd. Sertifikalar

Termal İletkenlik Pedi, çok iyi çalışıyor ve çalışıyor. Artık diğer Termal İletken Pad'e ihtiyacımız yok!

—— Peter Goolsby

2 yıldır Ziitek ile işbirliği yaptım, yüksek kaliteli termal iletken malzemeler sağladılar ve zamanında teslim ettiler, faz değişim malzemelerini tavsiye ettiler

—— Antonello Sau

Kaliteli, iyi hizmet. Ekibiniz bize her zaman yardım eder ve çözer, her zaman iyi bir partner olacağımızı umarız!

—— Chris Rogers

Ben sohbet şimdi

5.0W High Quality Factory Wholesale Customized Thermal Pad Thermal Gap Filler Insulation Sheet Silicone Pad For LED CPU GPU MOS

Büyük resim : 5.0W High Quality Factory Wholesale Customized Thermal Pad Thermal Gap Filler Insulation Sheet Silicone Pad For LED CPU GPU MOS

Ürün ayrıntıları:

Menşe yeri:	Çin
Marka adı:	ZIITEK
Sertifika:	UL and RoHs
Model numarası:	TIF800US

Ödeme & teslimat koşulları:

Min sipariş miktarı:	1000 pcs
Fiyat:	Anlaşılabilir
Ambalaj bilgileri:	1000pcs/çanta
Teslim süresi:	3-5 iş günü
Yetenek temini:	10000/gün

İletişim

Detaylı ürün tanımı

Ürün adı:	5.0W Yüksek Kaliteli Fabrika Toptan Özelleştirilmiş Termal Pad Termal Boşluk Dolgu Yalıtım Sayfası L	Anahtar Kelimeler:	termal boşluk dolgu pedi
Termal iletkenlik:	5,0 W/mK	İnşaat ve Kompozisyon:	Seramik Dolu Silikon Elastomer
Örnek:	Özgür	Yoğunluk:	3.4 g/cm³
Sertlik:	20 Shore 00	Kalınlık:	Değişen Kalınlıklarda Mevcuttur
Başvuru:	LED CPU GPU MOS

5.0W High Quality Factory Wholesale Customized Thermal Pad Thermal Gap Filler Insulation Sheet Silicone Pad For LED CPU GPU MOS

Products description

The TIF^®800US thermally conductive interface materials are applied to fill the air gaps between the heating elements and the heat dissipation fins or the metal base. Their flexibility and elasticity make them suited to the coating of the very uneven surfaces. Heat can transmit to the metal housing or dissipation plate from the separate elements or even the entire PCB, which in effect enhances the efficiency and life-time of the heat-generating electronic components.

Features:

> Good thermal conductive: 5.0W/mK
> Naturally tacky needing no further adhesive coating
> Soft and Compressible for low stress applications
> Available in varies thickness

> Broad range of hardnesses available
> Moldability for complex parts
> Outstanding thermal performance

Applications:

> Cooling components to the chassis of frame
> High speed mass storage drives
> Heat Sinking Housing at LED-lit BLU in LCD
> LED TV and LED-lit lamps
> RDRAM memory modules
> Micro heat pipe thermal solutions
> Handheld portable electronics
> Semiconductor automated test equipment (ATE)
> CPU
> Display card
> Mainboard/mother board
> Notebook

Typical Properties of TIF^®800US Series
Color	Gray	Visual
Construction & Compostion	Ceramic filled silicone elastomer	******
Specific Gravity	3.4g/cc	ASTM D297
Thickness range	0.020"(0.500)~0.200"(5.0mm)	ASTM D374
Hardness	20 Shore 00	ASTM 2240
Operating temp	-40 to 200℃	******
Dielectric Breakdown Voltage	≥5000 VAC	ASTM D149
Dielectric Constant @1MHz	4.5	ASTM D150
Volume Resistivity	≥ 1.0X10¹² Ohm-meter	ASTM D257
Flame rating	94 V0	UL E331100
Outgassing (TML)	0.55%	ASTM E595
Thermal conductivity	5.0 W/m-K	ASTM D5470
Thermal conductivity	5.0 W/m-K	ISO 22007-2

Products specification

Product Thicknesses: 0.020-inch to 0.200-inch (0.5mm to 5.0mm) with increments of 0.01 inch(0.25mm).

Product Sizes: 8" x 16"(203mm x406mm)Component Codes:
Reinforcement Fabric: FG (Fiberglass).
Coating Options: NS1 (Non-adhesive treatment), DC1 (Single-sided hardening).
Adhesive Options: A1/A2 (Single-sided/Double-sided adhesive).
The TIF series is available in custom shapes and various forms. For other thicknesses or more information, please contact us.

Company Profile

Ziitek Electronic Material and Technology Ltd. is a R&D and production company, we have many production lines and processing technology of thermal conductive materials, owns advanced production equipment and optimized process, can provide various thermal solutions for different applications.

FAQ:

Q: Are you trading company or manufacturer ?

A: We are manufacturer in China.

Q: How long is your delivery time?

A: Generally it is 3-7 work days if the goods are in stock. or it is 7-10 work days if the goods are not in stock, it is according to quantity.

Q: Do you provide samples ? is it free or extra cost?

A: Yes, we could offer samples free of charge.

Etiket: